HV580L Series Elevator Inverter

Variable frequency Drive type

Voltage V

Input Current  A

Output current  A

Adapter motor

Kw       HP

HV580L-004G3

380V,50/60Hz

10.5

8.5

4

5

HV580L-5R5G3

380V,50/60Hz

15.5

13

5.5

7.5

HV580L-7R5G3

380V,50/60Hz

21

16

7.5

10

HV580L-009G3

380V,50/60Hz

21

16

7.5

10

HV580L-011G3

380V,50/60Hz

27.6

25

11

15

HV580L-015G3

380V,50/60Hz

37.1

32

15

20

HV580L-018G3

380V,50/60Hz

41.9

38

18.5

25

Item

Specifications

Standard

functions

Maximum frequency

• Vector control: 0–300 Hz• V/F control: 0–320 Hz

Carrier

Frequency

0.5–16 kHz

The carrier frequency is automatically adjusted based on the load features.

Input frequency

Resolution

Digital setting: 0.01 Hz

Analog setting: maximum frequency x 0.025%

Control mode

• Sensorless flux vector control (SFVC)

• Closed-loop vector control (CLVC)

• Voltage/Frequency (V/F) control

Startup torque

• G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC)

• P type: 0.5 Hz/100%

Speed range

1:100 (SVC)

1:1000 (FVC)

Speed stability

Accuracy

±0.5% (SVC)

±0.02% (FVC)

Torque control

Accuracy

±5% (FVC)

Overload capacity

• G type: 60sor 150% of the rated current, 3s for 180% of the rated current

• P type: 60s for 120% of the rated current, 3s for 150% of the rated current

Torque boost

• Fixed boost• Customized boost 0.1%–30.0%

 V/F curve

• Straight-line V/F curve• Multi-point V/F curve

• N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power,square)

V/F separation

Two types: complete separation; half separation

Ramp mode

 • Straight-line ramp• S-curve ramp

Four groups of acceleration/deceleration time with the range of 0.0–6500.0s

DC braking

DC braking frequency: 0.00 Hz to maximum frequency

Braking time: 0.0–36.0s

Braking action current value: 0.0%–100.0%

JOG control

JOG frequency range: 0.00–50.00 Hz

JOG acceleration/deceleration time: 0.0–6500.0s

Onboard multiple preset speeds

It implements up to 16 speeds via the simple PLC function or combination of X terminal states.

Onboard PID

It realizes process-controlled closed loop control system easily.

Auto voltage

regulation (AVR)

It can keep constant output voltage automatically when the mains voltage changes.

Over voltage/

Over current stall Control

The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current.

Fast current limiting function

Minimizing over-current fault  protect the normal operation of the inverter

Torque limit and control

It can limit the torque automatically and prevent frequent over current tripping during the running process.

Torque control can be implemented in the CLVC mode.

Individualized

functions

High performance

Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology.

Power dip ride

Through

The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.

Rapid current limit

It helps to avoid frequent over current faults of the AC drive.

Virtual I/Os

Five groups of virtual DI/Dos can realize simple logic control.

Timing control

Time range: 0.0–6500.0 minutes

Multi-motor

switchover

Four motors can be switched over via four groups of motor parameters.

Multiple

communication

Protocols

It supports communication via Modbus -RTU, PROFIBUSDP, CAN link and CAN open.

Motor overheat

Protection

The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection.

Multiple encoder

Types

It supports various encoders such as differential encoder, open-collector encoder, resolver, UVW encoder, and SIN/COS encoder.

RUN

Running

command source

• Operation panel • Control terminals • Serial communication port

You can perform switchover between these sources in various ways.

Frequency source

There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting.

You can perform switchover between these sources in various ways.

Auxiliary

frequency source

There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis.

Input terminal

Standard:

5 digital input (X) terminals, one of which supports up to

100 kHz high-speed pulse input

2 analog input (AI) terminals, one of which only supports

0–10 V voltage input and the other supports 0–10 V voltage

input or 4–20 m A current input

Expanding capacity:

5 X terminals(one of which supports IGBT enable function)

1 AI terminal that supports -10–10 V voltage input and also

supports PT100\PT1000

Output terminal

Standard

1 high-speed pulse output terminal (open-collector) that

supports 0–100 kHz square wave signal output

1 digital output (DO) terminal

1 relay output terminal

1 analog output (AO) terminal that supports 0–20 m A

current output or 0–10 V voltage output

Expanding capacity:

1 DO terminal

1 relay output terminal

1 AO terminal that supports 0–20 m A current output or 0–10

V voltage output

Display and

operation on

the operation

panel

LED display

 It displays the parameters.

 LCD displaying

Optional parts, Chinese/English Prompt action content

 Parameters of the copy

Achieved through the LCD operation panel option parameters of rapid replication

Key locking and

function selection

It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function.

Protection mode

Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, over voltage protection, under voltage protection, overheat protection and overload protection

Environment

Installation

Location

Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.

Altitude

Lower than 1000 m

Ambient Temperature

-10°C to +40°C (de-rated if the ambient temperature is between 40°C and 50°C)

Humidity

Less than 95%RH, without condensing

Vibration

Less than 5.9 m/s2 (0.6 g)

Storage Temperature

－ 20℃ ~ ＋ 60℃

IP level

IP20

Pollution degree

PD2

Power distribution

System

TN , TT